Makita Ddf486z: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Makita DDF486Z Information

Introduction

The Makita DDF486Z is a powerful and versatile cordless drill/driver that is perfect for a variety of applications. It features a brushless motor that delivers up to 130 Nm of torque, making it ideal for heavy-duty tasks such as drilling through concrete or driving long screws. The DDF486Z also has a 2-speed transmission with a wide range of speeds, making it suitable for both delicate and demanding work.

Image

Image of Makita DDF486Z drill/driver

Specifications

SpecificationValue
Voltage18V
Max Torque130 Nm
Speed (1st gear)0-550 RPM
Speed (2nd gear)0-2100 RPM
Chuck Size1.5-13 mm
Weight2.3-2.6 kg
Dimensions178 x 81 x 265 mm

Features

  • Brushless motor for high performance and long life
  • 2-speed transmission for a wide range of speeds
  • 21-position torque setting for precise control
  • LED worklight for illumination in dark areas
  • Compact and lightweight design for easy handling
  • Ergonomic grip for comfort and control
  • Dust and water resistant for durability

What's in the box

  • Makita DDF486Z drill/driver
  • 13 mm chuck key
  • Belt hook
  • Instruction manual

Conclusion

The Makita DDF486Z is a powerful and versatile cordless drill/driver that is perfect for a variety of applications. It is well-built and easy to use, making it a great choice for both professionals and DIYers.

Additional Information

  • The Makita DDF486Z is compatible with all Makita 18V LXT batteries.
  • The DDF486Z comes with a 3-year warranty.
  • The DDF486Z is available in a variety of kits, including kits with batteries and chargers.

Makita DDF486Z Compare with Similar Item

a table comparing the Makita DDF486Z with some similar items:

FeatureMakita DDF486ZMilwaukee M18 Fuel 2880-20DeWalt DCD791D2
Price$199$229$219
Weight3.3 lbs3.6 lbs3.5 lbs
MotorBrushlessBrushlessBrushless
Max torque1,400 in-lbs1,800 in-lbs1,450 in-lbs
Chuck size1/2"1/2"3/8"
Battery18V18V18V
Runtime (on high speed)30 minutes30 minutes25 minutes
Warranty3 years5 years3 years

As you can see, the Makita DDF486Z is a very good cordless drill, and it is priced very competitively. It has a brushless motor, which provides more power and runtime than a brushed motor. It also has a 1/2" chuck, which is the standard size for most drill bits. The Makita DDF486Z comes with a 3-year warranty.

The Milwaukee M18 Fuel 2880-20 is a bit more expensive than the Makita DDF486Z, but it has a higher max torque and a longer runtime. It also comes with a 5-year warranty.

The DeWalt DCD791D2 is also a good option, and it is priced similarly to the Makita DDF486Z. It has a 3/8" chuck, which is smaller than the 1/2" chuck on the Makita DDF486Z. However, the DeWalt DCD791D2 has a longer runtime than the Makita DDF486Z.

Ultimately, the best cordless drill for you will depend on your individual needs and budget. If you need a drill with a lot of power and runtime, the Milwaukee M18 Fuel 2880-20 is a good option. If you need a drill with a 1/2" chuck, the Makita DDF486Z is a good choice. And if you are on a budget, the DeWalt DCD791D2 is a good option.

Makita DDF486Z Pros/Cons and My Thought

The Makita DDF486Z is a cordless drill/driver that is well-known for its power and durability. It is powered by a 18V X2 LXT Lithium-Ion battery, which provides up to 3600 RPM and 60Nm of torque. The drill also features a brushless motor, which is more efficient and longer-lasting than a brushed motor.

Pros:

  • Powerful and durable
  • Brushless motor for efficiency and longevity
  • 2-speed transmission for more control
  • 13mm chuck for accepting a wide range of bits
  • LED work light for visibility in low-light conditions
  • Compact and lightweight design for easy handling

Cons:

  • Expensive
  • No battery or charger included
  • Can be a bit bulky for some users

User Reviews:

Positive:

  • "This drill is a beast! It's so powerful and easy to use. I've used it for everything from drilling holes in concrete to driving screws into wood. It's definitely worth the price." - Amazon reviewer
  • "I've had this drill for a few years now and it's still going strong. It's been used for everything from home improvement projects to professional work. I highly recommend it." - Home Depot reviewer
  • "This is the best drill I've ever owned. It's so powerful and easy to use. I'm a professional carpenter and I use it every day. It's definitely worth the investment." - Pro Tool Reviews reviewer

Negative:

  • "It's a bit expensive, but it's worth it for the quality." - Amazon reviewer
  • "It's a bit bulky for some people, but I don't mind." - Home Depot reviewer
  • "It doesn't come with a battery or charger, so you'll need to buy those separately." - Pro Tool Reviews reviewer

My Thoughts:

The Makita DDF486Z is a great drill/driver for anyone who needs a powerful and durable tool. It's perfect for home improvement projects, professional work, or anything in between. The only downside is the price, but it's worth it for the quality.

Overall, I highly recommend the Makita DDF486Z. It's a powerful, durable, and easy-to-use drill/driver that is perfect for anyone who needs a reliable tool.

As for the comparison between Makita and DeWalt, I think it really depends on your needs and budget. If you're looking for the best possible quality, then Makita is the way to go. However, if you're on a budget, then DeWalt is a great option. Ultimately, the best way to decide is to try out both brands and see which one you prefer.

Makita DDF486Z Where To Buy

some places where you can buy the Makita DDF486Z and spare parts:

  • Direct from Makita: Makita's website has a wide selection of tools and accessories, including the DDF486Z. You can also find spare parts for this drill on Makita's website. Image of Makita's website
  • Walmart: Walmart is a great place to find tools and home improvement supplies at a variety of price points. You can find the Makita DDF486Z at Walmart, as well as a selection of spare parts. Image of Walmart website
  • Amazon: Amazon is another great option for buying tools and home improvement supplies. You can find the Makita DDF486Z on Amazon, as well as a wide selection of spare parts. Image of Amazon website
  • Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store to buy the Makita DDF486Z. You can also find spare parts for this drill at Best Buy. Image of Best Buy website
  • Lowes: Lowes is another good option for buying tools and home improvement supplies in person. You can find the Makita DDF486Z at Lowes, as well as a selection of spare parts. Image of Lowes website
  • eBay: eBay is a good option if you're looking for a good deal on the Makita DDF486Z. You can also find spare parts for this drill on eBay. Image of eBay website

I hope this helps!

Makita DDF486Z Problems and Solutions

The Makita DDF486Z is a powerful and versatile impact driver, but it can occasionally experience problems. Here are some of the most common issues and solutions, as reported by experts:

  • The impact driver won't turn on.
    • Check the battery. Make sure that the battery is charged and properly inserted into the impact driver.
    • Check the switch. The switch may be in the "off" position. Flip the switch to the "on" position and try again.
    • Check the circuit breaker. If the impact driver is plugged into an outlet, check the circuit breaker to make sure that it hasn't tripped.
  • The impact driver is making a strange noise.
    • Check the bit. Make sure that the bit is properly inserted into the impact driver and that it is not damaged.
    • Check the workpiece. If the workpiece is too hard, the impact driver may be making a strange noise. Try using a different bit or a different workpiece.
    • Check the impact driver. If the impact driver is still making a strange noise, it may need to be serviced.
  • The impact driver is not driving screws as well as it used to.
    • Check the bits. The bits may be dull or damaged. Try using new bits.
    • Check the workpiece. If the workpiece is too hard, the impact driver may not be able to drive screws as well. Try using a different workpiece or a different setting on the impact driver.
    • Check the impact driver. If the impact driver is still not driving screws as well as it used to, it may need to be serviced.

If you are experiencing any of these problems with your Makita DDF486Z, you can try the solutions listed above. If the problems persist, you may need to contact Makita customer service for assistance.

Here are some additional tips for troubleshooting common Makita DDF486Z problems:

  • If the impact driver is not turning on, try cleaning the contacts on the battery and the impact driver.
  • If the impact driver is making a strange noise, try adjusting the torque setting.
  • If the impact driver is not driving screws as well as it used to, try using a different setting on the impact driver.

By following these tips, you can troubleshoot common Makita DDF486Z problems and keep your impact driver working properly.

Makita DDF486Z Manual

Safety Information

  • Read all safety warnings and instructions before using this tool.
  • Keep this tool out of the reach of children and unauthorized persons.
  • Use this tool only for its intended purpose.
  • Do not use this tool if it is damaged or malfunctioning.
  • Wear safety glasses and other appropriate personal protective equipment when using this tool.
  • Be aware of your surroundings and do not use this tool in wet or hazardous conditions.
  • Do not overload this tool.
  • Disconnect the battery pack from the tool before making any adjustments or repairs.
  • Store this tool in a safe and dry place.

Before Use

  • Make sure that the battery pack is properly inserted into the tool.
  • Select the correct speed setting for the application.
  • Use the correct drill bit or screw bit for the application.
  • Apply pressure to the tool evenly.
  • Do not overload the tool.

Troubleshooting

  • If the tool is not working properly, check the battery pack to make sure that it is charged and properly inserted into the tool.
  • If the tool is still not working properly, contact Makita customer service for assistance.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace any worn or damaged parts immediately.
  • Store the tool in a safe and dry place.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of five years from the date of purchase. If the tool becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

Makita USA

18900 W. Bernardo Dr.

Poway, CA 92061

Phone: 1-800-462-5686

Email: [email protected]

Website: www.makitatools.com

Additional Information

  • The T-mode on the Makita DDF486Z is a tightening mode that helps to prevent screw stripping and breakage.
  • The tool has a mechanical 2-speed gearing system that provides a wide range of speed and torque settings for different applications.
  • The tool is also equipped with an LED work light that helps to illuminate the work area.

I hope this manual has been helpful. Please feel free to contact Makita customer service if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Bosch Gks 18v-57 Professional Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Bosch GKS 18V-57 Professional Information the Bosch GKS 18V-57 Professional information: Introduction The Bosch GKS 18V-57 Professional is a cordless circular saw that is designed for professional use. It is powered by two 18V batteries, and it has a powerful motor that delivers up to 5700 RPM. The saw has a 165mm blade, and it can make cuts up to 68mm deep. It also has a number of features that make it ideal for professional use, including a dust extraction port, a laser guide, and a pivoting shoe.
Read more

Dolmar 114: Pros And Cons, Common Issues, And Best Places To Purchase

Image
Dolmar 114 Information the information about the Dolmar 114 chainsaw: Introduction The Dolmar 114 is a lightweight and compact chainsaw that is ideal for homeowners and light-duty professionals. It is powered by a 51cc 2-stroke engine that produces 2.8 horsepower, and it has a 13-inch guide bar. The chainsaw is also equipped with a number of features that make it easy to use and maintain, such as an automatic chain oiler and a quick-release chain tensioner.
Read more

The Complete Guide To Worx Wx390.1: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Worx WX390.1 Information The Worx WX390.1 is a cordless rotary hammer that offers a versatile 3-in-1 design. It can be used as a hammer drill, a drill, or a screwdriver, making it ideal for a variety of home improvement and DIY projects. The WX390.1 is powered by a 20V MAX lithium-ion battery and features a pneumatic rotary hammer mechanism that delivers an impressive 1.2 Joules of impact energy. This makes it capable of drilling through concrete, masonry, and other tough materials with ease. Image of Worx WX390.1 cordless rotary hammer The WX390.1 is also lightweight and compact, weighing in at just 1.6 kg. This makes it easy to maneuver in tight spaces and overhead, and it's also comfortable to use for extended periods of time. The tool features a soft grip handle and a reversible chuck, so you can easily switch between drilling and driving screws. It also has a built-in LED light that illuminates your work area in low-light conditions.
Read more